ReptiRad - Ultrasonic Humidifier

The included extendable hose provides convenient and versatile humidification. With a maximum length of 150cm, you can easily direct the mist exactly where it's needed within your living space.

Our Ultrasonic Humidifier utilizes advanced ultrasonic technology to break water droplets into fine mist particles. This ensures an even fog distribution, preventing any areas of excess moisture or dry spots, and creating a balanced and comfortable environment.

Your safety is our top priority. Our Ultrasonic Humidifier features a built-in safety cut-off mechanism that automatically shuts off the device when the water levels are low. This prevents any potential damage or accidents, providing peace of mind.

Take full control of the humidity levels with the adjustable mist control feature. Easily customise the output to suit your specific needs, whether it's creating a cosy ambience, relieving dry air, or promoting better sleep.

• Remove humidifier from all outer packaging.

• Place the base of the humidifier onto a flat, sturdy surface.

• Twist off the cap on the underside of the upper half of the humidifier and fill the reservoir with clean water (To reduce the frequency the humidifier requires cleaning we recommend using RO water however tap water is also acceptable)

• Place the cap back onto the reservoir opening and twist until it is firmly secure

• Flip the upper half of the humidifier and place it onto the base. This should fit flush to the base so if you are having trouble, ensure that the top is orientated correctly as it wont fit if it positioned incorrectly

• Once the humidifier has been filled and made whole, place the output tube adaptor into the opening at the top of the unit, applying gentle pressure to ensure the fitting is securely in place.

• Connect the output tube to the adaptor by applying gentle pressure to ensure a secure fit. The tube should slide over the adaptor relatively easily with some resistance to ensure a tight fit and prevent leakage.

• Place the other end of the output tube into the desired area of your enclosure or room, ensuring it is positioned near the top of the enclosure to allow for the vapour to fall down evenly through the enclosure

• The tube can be extended or shortened to meet your specific needs and to ensure that it doesn’t droop allowing water to collect inside which could cause blockages, reducing the effectiveness of the humidifier.

• Suction mounts provided with the humidifier can be used to support the output tube if required to help prevent water from building up inside. These suction mounts are fitted by sliding the output tube through the loops on the suction mounts (These will be very tight so take care not to damage or bend the tube whilst fitting these.)

• With dry hands plug the humidifier into the power outlet and turn the dial on the front of the humidifier until you reach your desired output level.

• Once the humidifier is running be sure to inspect the output tube for any collecting water and place the suction mount supports accordingly to reduce the likelihood of blockages occurring.

• The ReptiRad Ultrasonic Humidifier can also be used in conjunction with the ReptiPlug allowing it to be turned on and off remotely or in line with a schedule using the SmartLife app. This allows full control of the humidity of your enclosures without the need for constant physical monitoring.

• Depending of the output level the humidifier is set to, the reservoir can last from 7-12 hours of consistent use before being refilled. 

• The ReptiRad has an auto cut-off safety feature that helps prevent atomizer burnout in the event that the reservoir runs dry. Although this will help prevent damage to the atomizer it is recommended that the reservoir is checked regularly to ensure it hasn’t run dry.

• To refill the humidifier, ensure it is turned off either at the power outlet or by turning the dial to the off position and remove the output tube adaptor from the top of the unit.

• Lift the top half of the humidifier off the base and flip it upside down.

• Unscrew the reservoir cap and fill the reservoir to the top.

• Screw the cap back on and flip the reservoir before placing it onto the base.

• Re-fit the output tube adaptor as described above and turn the unit back on.

• Be sure to re-assess the output tube for any water pooling and adjust the positioning of the tube accordingly to prevent blockages.

• To clean the humidifier, rinse thoroughly with clean water several times until any deposits have been rinsed away

• For tougher mineral deposits we recommend using a soft sponge with clean water to remove them before rinsing thoroughly to wash away any remnants.

• It is recommended that the humidifier be cleaned once per month however if using tap water this may need to be carried out more frequently.